Lexmark MB2236 User Manual page 54

Use printer menus
Restore Factory Defaults
Menu item
Restore Settings
Restore all settings
Restore printer settings
Restore network settings
Restore fax settings
Maintenance
Config Menu
Menu item
USB Configuration
USB PnP
1*
2
USB Configuration
USB Scan to Local
On*
Off
USB Configuration
USB Speed
Full
Auto*
Tray Configuration
Show Tray Insert Message
Off
Only for unknown sizes*
Always
Tray Configuration
A5 Loading
Short Edge*
Long Edge
Tray Configuration
Paper Prompts
Auto*
Manual Paper
Envelope Prompts
Auto*
Manual Envelope
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Restore the printer factory default settings.
Description
Change the USB driver mode of the printer to improve its
compatibility with a personal computer.
Set whether the USB device driver enumerates as a USB
Simple device (single interface) or as a USB Composite device
(multiple interfaces).
Set the USB port to run at full speed and disable its high‑speed
capabilities.
Show message about the tray status.
Specify the page orientation when loading A5 paper size.
Set the paper source that the user fills when a prompt to load
paper or envelope appears.
54