Lexmark MB2236 User Manual page 60

Use printer menus
Menu item
Lines per Page
1–255
PCL5 Minimum Line Width
1–30 (2*)
PCLXL Minimum Line Width
1–30 (2*)
A4 Width
198 mm*
203 mm
Auto CR after LF
Off*
On
Auto LF after CR
Off*
On
Print Timeout
Off
On* [90]
Note: An asterisk (*) next to a value indicates the factory default setting.
Image
Menu item
Auto Fit
On
Off*
Invert
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the number of lines of text for each page printed through the PCL
datastream.
Notes:
•
This menu item activates vertical escapement that causes the
selected number of requested lines to print between the default
margins of the page.
•
60 is the U.S. factory default setting. 64 is the international factory
default setting.
Set the initial minimum stroke width.
Notes:
•
Jobs printed in 1200 dpi use the value directly.
•
Jobs printed in 4800 CQ use half the value.
Set the width of the logical page on A4‑size paper.
Note: Logical page is the space on the physical page where data is
printed.
Set the printer to perform a carriage return after a line feed control
command.
Note: Carriage return is a mechanism that commands the printer to move
the position of the cursor to the first position on the same line.
Set the printer to perform a line feed after a carriage return control
command.
Set the printer to end a print job after it has been idle for the specified
amount of time in seconds.
Description
Select the best available paper size and orientation setting for an image.
Note: When set to On, this menu item overrides the scaling and orientation
settings for the image.
Invert bitonal monochrome images.
Note: This menu item does not apply to GIF or JPEG image formats.
60
®