Lexmark MB2236 User Manual page 66

Use printer menus
Menu item
Enable Line In Wrong Jack
Detection
Off*
On
Enable Extension in Use
Support
Off
On*
Optimize Fax Compatibility
Note: An asterisk (*) next to a value indicates the factory default setting.
Fax Send Settings
Menu item
Resolution
Standard*
Fine
Super Fine
Ultra Fine
Original Size
[List of paper sizes]
Content Type
Text*
Text/Photo
Photo
Graphics
Darkness
1–9 (5*)
Behind a PABX
On
Off*
Dial Mode
Tone*
Pulse
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Determine whether a telephone line is connected to the correct port on the
printer.
Notes:
•
Detection takes place when turning on the printer and before each call.
•
This menu item does not appear if Fax Transport is set to T.38.
Determine whether a telephone line is used by another device such as another
phone on the same line.
Notes:
•
This menu item is monitored continuously after turning on the printer.
•
This menu item does not appear if Fax Transport is set to T.38.
Configure the printer fax functionality for optimal compatibility with other fax
machines.
Description
Set the resolution of the scanned image.
Note: A higher resolution increases fax transmission time and requires higher
memory.
Specify the size of the original document.
Note: Mixed Sizes is the U.S. factory default setting. A4 is the international
factory default setting.
Improve the output result based on the content of the original document.
Adjust the darkness of the scanned image.
Set the printer to dial a fax number without waiting to recognize the dial tone.
Note: Private Automated Branch Exchange (PABX) is a telephone network that
allows a single access number to offer multiple lines to outside callers.
Specify the dial mode for incoming or outgoing faxes.
66