Lexmark MB2236 User Manual page 56

Use printer menus
Menu item
Scanner Configuration
Scanner Manual Registration
Front ADF Registration
Flatbed Registration
Scanner Configuration
Edge Erase
ADF Edge Erase
0–6 (3*)
Flatbed Edge Erase
0–6 (3*)
Scanner Configuration
Disable Scanner
Enabled*
Disabled
ADF Disabled
Scanner Configuration
Tiff Byte Order
CPU Endianness*
Little Endian
Big Endian
Scanner Configuration
Exact Tiff Rows Per Strip
On*
Off
Note: An asterisk (*) next to a value indicates the factory default setting.
Out of Service Erase
Menu item
Erase Printer Memory
Printer Memory Last Sanitized
Sanitize all information on nonvolatile memory
Erase all printer and network settings
About this Printer
Menu item
Asset Tag
Printer's Location
Contact
Description
Show the serial number of the printer.
Identify the printer location. The maximum length is 63 characters.
Personalize the printer name. The maximum length is 63 characters.
Description
Manually register the flatbed and ADF after replacing the ADF,
scanner glass, or controller board.
Set the size, in millimeters, of the no‑print area around an ADF
or flatbed scan job.
Disable the scanner if it is not working properly.
Set the byte order of a TIFF‑formatted scan output.
Set the RowsPerStrip tag value of a TIFF‑formatted scan output.
Description
Clear all settings and applications that are stored in the printer.
56