MTU 12V4000M93 series Operating Instructions Manual page 101

Simulating power failure (emergency): SAT
1. Switch on fuel treatment system (→ Page 100).
2. Start engine (→ Page 92).
3. Run engine at idling speed.
4. Switch off pump (21) at switchgear cabinet (20).
Result: The engine-mounted fuel delivery pump draws fuel via bypass (2) directly from tank (24).
5. Check suction pressure at the engine-mounted fuel delivery pump.
Note: If the suction pressure is within the admissible limits and engine operation is satisfactory.
6. Operate engine at full load and monitor suction pressure.
Result: Simulation was successful if the suction pressure is within the specified limits.
MS150047/05E 2018-08 | Operation | 99