Operational Checks - MTU 12V4000M93 series Operating Instructions Manual

4.6 Operational checks

DANGER
Components are moving or rotating.
Risk of crushing, danger of parts of the body being caught or pulled in!
• Operate the engine at low load only. Keep clear of the danger zone of the engine.
WARNING
High level of engine noise when the engine is running.
Risk of damage to hearing!
• Wear ear protectors.
Operational checks
Item
Engine oil
Engine under load,
engine at nominal speed
Air filter
Fuel prefilter
HT coolant pump
Raw water pump
Action
Check engine oil level (→ Page 200).
Visually inspect engine for leaks and general condition;
Check speed, pressures and temperatures;
Check engine and external lines for leaks;
Check for abnormal running noises and vibration;
Check exhaust color (→ Page 116).
Check signal ring position of service indicator (→ Page 198);
Replace air filter (→ Page 196) if the signal ring is completely visible in the
service indicator observation window.
Drain water and contaminants from fuel prefilter (→ Page 183).
Check pointer position of differential pressure gage at fuel prefilter
(→ Page 182).
Check relief bore for oil and coolant discharge and contamination
(→ Page 220).
Check relief bore for oil and water discharge and contamination
(→ Page 222).
MS150047/05E 2018-08 | Operation | 93