User Information; General; Symbols And Conventions - Dick SM-200 TE Operating Instructions Manual

User Information

1. User Information
1.1

General

These operating instructions are an integral part of the SM-200 TE
grinding and honing machine with the serial number indicated on
the type plate (the type plate is located on the back of the SM-200
TE grinding and honing machine).
The operating instructions must be kept close at hand at all times.
They contain important information and instructions for safe,
proper and economic use of the SM-200 TE grinding and honing
machine. They must have been read and understood by each per-
son before this person can be entrusted with the following work
using the SM-200 TE grinding and honing machine:
• Putting the machine into operation,
• Operating,
• Servicing.
The operating instructions must be followed during all work on and
with the SM-200 TE grinding and honing machine. Following the
information and instructions helps to prevent hazards, to reduce
repair costs and to increase the reliability and life of the SM-200 TE
grinding and honing machine.
The technical information and instructions for use in these operat-
ing instructions are up-to-date and correct on delivery of the SM-
200 TE grinding and honing machine. Friedr. Dick GmbH & Co. KG
reserves the right to further develop the design and to make
changes without notice.
All directional information is given from the view of the user.
1.2

Symbols and conventions

Instructions
Sequences of actions, which must be carried out in the given order
are specified as a numbered list. Example:
1 Instruction step 1.
2 Instruction step 2.
SM-200 TE Grinding and Honing Machine
1
5