Setting The Radial Grinding Arm - Dick SM-200 TE Operating Instructions Manual

Setting up the Machine
8
Grinding radius/distance Position on the universal grinding
< 260 mm
> 260 mm
Figure 8.7 – Setting the grinding radius
[1] Clamping piece
[2] Screws
Changing the grinding radius:
1 Remove the screws [2].
2 Remove the clamping piece [1] with the universal mounting
3 Remove the plugs from the holes on the back of the grinding arm.
4 Use the screws to fasten the clamping piece [1] with the uni-
5 Use the plugs to block the holes on the front of the grinding arm.
8.8
The radial grinding arm provides a range of settings for grinding
round cutting edge shapes. The radial grinding arm positions the
universal mounting head in different positions in the direction of the
grinding plate. The rotary function of the universal mounting head
is required for the grinding tasks.
SM-200 TE Grinding and Honing Machine
40
head from the grinding arm.
versal mounting head on the grinding arm.

Setting the radial grinding arm

arm
Front
Back
2
1