Dick SM-200 TE Operating Instructions Manual page 14

Safety
5
•
Risk of injuries due to the poor health of the operator
Lack of concentration, over-tiredness, illness, drunkenness or leg
or arm disabilities as well as mental disabilities cause a high risk
of injuries.
•
•
•
Risk of injury when touching the SM-200 TE grinding and
honing machine
Touching the grinding wheel, polishing wheel or grinding belt
when the abrasives and SM-200 TE grinding and honing machine
are switched on will cause injuries.
•
•
•
•
SM-200 TE Grinding and Honing Machine
14
- Correct assembly of all covers and the housing,
- Function of the switches.
Replace damaged parts before reusing the SM-200 TE grind-
ing and honing machine.
People who work at the SM-200 TE grinding and honing
machine must be healthy and capable of concentrating.
Before starting work at the SM-200 TE grinding and honing
machine, ensure that you are in a stable position in which
you can maintain your balance without any effort.
When grinding and polishing, do not look away from the SM-
200 TE grinding and honing machine and the workpiece.
Do not touch any abrasives when the abrasives and machine
are switched on.
Do not use any objects to brake rotating abrasives.
The switched on SM-200 TE grinding and honing machine
must be inaccessible to persons not working at the SM-200
TE grinding and honing machine, especially to children.
Switch off the SM-200 TE grinding and honing machine and
pull the mains plug out of the socket before leaving the work
area
CAUTION
CAUTION