Covers - Dick SM-200 TE Operating Instructions Manual

Safety
5
5.6
Risk of injuries due to missing covers
The SM-200 TE grinding and honing machine may only be put
into operation when all covers and guard plates on the grinding
wheel, polishing wheel and grinding belt (see chapter 6.4 Covers)
are fully functional.
The SM-200 TE grinding and honing machine is covered with
sheet metal. The user cannot come into contact with moving parts
inside the machine.
The covers of the polishing wheel and wet grinding belt as well as
the guard plate of the grinding wheel are fastened with tommy
screws. They are very easy to remove for making adjustments or
modifications or for servicing. The belt safety guard on the wet
grinding belt must be mounted in such a way that the SM-200 TE
grinding and honing machine can be started.
SM-200 TE Grinding and Honing Machine
18

Covers

WARNING