Mapping Bacnet Output With Device Ez Profiles; Figure 23: Choose Profile To Load; Figure 24: Controls Section - SMC Networks FieldServer FS-EZX-MOD-BAC Startup Manual

6.4

Mapping BACnet Output with Device EZ Profiles

•
Open the DeviceProxy™ page.
•
Choose the Device Profile to load from the drop down menu.
NOTE: If required, click the Advanced Settings button (eye icon) to enter the Device Description
and Device Location.
•
Choose the appropriate connection and Node ID/BACnet Device Instance for both the incoming
Modbus device and the mapped BACnet output.
•
Click Add to include additional device profiles in the Configuration.
•
Repeat for all Modbus devices intended to connect to the EZ Gateway.
•
Click the Save button in the Controls section once all device EZ Profiles are added and then click
the Restart button to reset the system.
EZ Gateway Modbus to BACnet Start-up Guide

Figure 23: Choose Profile to Load

Figure 24: Controls Section

Page 23 of 49