Figure 14: Mapping Bacnet Addresses To Modbus Registers; Figure 15: Save Button - SMC Networks FieldServer FS-EZX-MOD-BAC Startup Manual

•
Click on the blue plus sign icon on the left side of the Address to map the BACnet Addresses to
the Modbus Registers.

Figure 14: Mapping BACnet Addresses to Modbus Registers

NOTE: The Advanced button (eye icon) allows additional settings, including: Intrinsic Reporting,
Bit Extraction, scaling and more.
•
Repeat for all of the Modbus registers.
•
Once all mappings are defined, click the "Save" button in the bottom left corner of the window to
record the Profile.
EZ Gateway Modbus to BACnet Start-up Guide

Figure 15: Save Button

Page 18 of 49