Table of Contents
Advertisement
6.3
Importing a Device Profile
•
Profiles on the local computer can be imported to the EZ Gateway by going to the Device Profiles
page and clicking the Import button.
NOTE: All profiles will need to be created or imported to the EZ Gateway before proceeding.
NOTE: There are two types of files that can be imported. The Excel spreadsheet generated files
(Section 6.2.2) or an exported profile (Section 6.2.4). Files generated from the downloaded
"Excel Profile Generator" only include Data Map information and must be completed by
going through the steps found in Section
profiles include complete profile information and can be used immediately after load up.
EZ Gateway Modbus to BACnet Start-up Guide
Figure 22: Importing a Device Profile
6.2.3
after being loaded. However, exported
Page 22 of 49
Advertisement
Table of Contents
Need help?
Do you have a question about the FieldServer FS-EZX-MOD-BAC and is the answer not in the manual?
Questions and answers