Table of Contents
Advertisement
Sound
1
Enter into sound page from System Setup
2
Choose On or OFF for the keypad sound. Set up reminder sound when bar code engine scan the bar code. If choose
mute, that mean no reminder and no keypad sound when keypad pressed and bar code read.
3
After setting, move arrow to Setup, click OK key to confirm the setting and quit from current page. Click on ESC key
to cancel the setting and eject from the setting page.
Volume
1
Enter into volume page from System Setup
2
Choose the volume for the keypad sound.
3
Choose the volume for the scanning.
4
After setting, move arrow to Setup, click OK key to confirm the setting and quit from current page. Click on ESC key
to cancel the setting and eject from the setting page.
15
Advertisement
Table of Contents
