Table of Contents
Advertisement
Communication
1
Enter into Communication page from System Setup
2
Choose the item from the list as shown below
USB Modes
1
Enter into USB Mode page from Communication
2
Click OK to open the list and choose the USB mode and click OK to confirm
3
Move arrow to Setup, click OK key to confirm the setting and quit from current page. Click on ESC key to cancel the
setting and eject from the setting page.
WIFI
1
Enter into WIFI page from Communication
2
The page indicates whether terminal is connected to WIFI and its information. If WIFI is off, please turn on WIFI
setting first
3
Once WIFI is on, please click on "Setup" button to start the setting.
12
Advertisement
Table of Contents
