Disable Of Bar Code Reading - Newland NLS-PT80 User Manual

Disable of Bar Code Reading

If the NLS-PT80 is disable of reading a bar code:
Please ensure the bar code is read in a correct way
Please check whether this kind of bar code is programmed readable
The terminal might not be able to read this kind of bar codes.
Caution
If the terminal lost power or abnormal cause can not boot up, try a hardware reset to start it, the method is to press
the reset button with needles. The location of reset button, please refer to the related chapter.
Please do not throw or drop the terminal to avoid the LCD screen is damaged or cause the program interrupt
execution to make the memory data loss, or other consequences of affecting the normal operation.
Clean the reading window periodically. Do not touch the transparent glass of the scanning window to avoid scratch or
stain glass affecting reading performance.
Please do not use sharp objects to touch the screen, it may cause the screen is damaged or the internal short circuit.
Please use a soft and dry cloth to wipe the terminal, and do not use a damp cloth, benzene, thinner or other volatile
chemicals to avoid the terminal keyboard and shell variant of aging.
Do not let the terminal face down in order to avoid the keyboard disoperation.
The environment temperature great change will lead to the terminal surface condensation, please dry the terminal
before use.
Adapter shall be installed near the equipment and shall be easily accessible. The plug considered as disconnect
device of adapter. The power adapter shall be considered as safety approval by CE(Adapter AC input: 100-240V~,
50/60Hz 0.4A; Output: 5Vdc/1.5A
Manufacturer of Adapter: Kuantech (Beihai) Co.,Ltd
Extreme Temperature: -20~+45
CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
39
Model No.: KSAS0120500150D5