Usb-Vcom; Installation Of Virtual Com Driver - Newland NLS-PT80 User Manual

In this mode, NLS-PT80 can be used as a Read-Only Flash Disk.

USB-VCOM

Select the "USB-VCOM" mode as shown below:
Click "Setup" and connect NLS-PT80 to the PC via USB cable. Then select "USB-VCOM" in the "Data Output Type" under "Bar
code Scanner" to program the data output mode.
Click "Setup" to finish the configuration.

Installation of Virtual COM Driver

After connection between PC and NLS-PT80 via USB cable, the Terminal Manger will have similar page as below:
30