Installing A Security Rope Clip - IBM xSeries 225 8647 Installation Manual

Installing a security rope clip

To help prevent theft, you can add a security rope clip and cable to your server.
Complete the following steps to install a rope clip:
1. Remove the side cover (see "Removing the side cover" on page 10).
2. Use a screwdriver to remove the two metal knockouts.
3. Insert the rope clip through the rear panel; then, attach and tighten the nuts.
4. Thread a cable through the rope clip and around an object that is not part of or
5. If you have other options to install or remove, do so now; otherwise, go to
34
IBM xSeries 225 Type 8647: Option Installation Guide
permanently secured to the building structure or foundation and from which the
cable cannot be removed. Fasten the cable ends together with a lock. After you
add the security cable, be certain it does not interfere with other cables
connected to the server.
Rope clip
"Completing the option installation" on page 39.