Instrument Cooling - Tektronix 2215A Operator's Instruction Manual

Preparation for Use- 2215A Operators
CAUTION
FOR CONTINUEO FIRE PROTECTION
REPLACE ONLY WITH SPECIFIE D
lYPE ANO RATED FUSEDISCONNECT
POWER INPUT BEFORE REPLACING FUSE
POWER
MAX WATTS 40
MAX VA 70
FREQ 48 -
440
Hz
FUSE 2SOV
LIN E
FUSE
EXT Z AXIS INPUT
þÿ10k© POSITIVE GOING
INPUT DECREASES
INTENSITY
5 VOLT
p-p
CAUSES
NOTICEABLE
MODULATION AT
NORMAL INTENSITY .
<=30VPEAK
TEKTRONIX INC , BEAVERTONOREGON, U
$
POWER
CORD
C4207·03
Figure 2-2. Fuse holder and power cord connector.
2-2
INSTRUMENT COOLING
Always maintain adequate instrument cooling. The venti-
lation holes on both sides of the instrument cabinet and on
the rear panel must remain free of obstruction.