Figure 3-5 Basic Operation With Sdp - Siemens Micromaster 440 Operating Instructions Manual

Issue 12/02
Basic operation with SDP
With the SDP fitted, the following is possible:
! Start and stopping the motor (DIN1 via external switch)
! Reversing the motor (DIN2 via external switch)
! Fault Reset (DIN3 via external switch)
Controlling the speed of the motor is accomplished by connecting the analog inputs
as shown in the Figure 3-5.
Analogausgang
0 - 20 mA
Figure 3-5
MICROMASTER 440 Operating Instructions
6SE6400-5AW00-0BP0
(500 Ω)
Basic operation with SDP
3 Commissioning
47