Siemens Micromaster 440 Operating Instructions Manual page 29

Issue 12/02
2.3.1 Mounting on standard rail, Frame Size A
Fitting the Inverter to a 35 mm standard rail (EN 50022)
Removing the Inverter from the rail
MICROMASTER 440 Operating Instructions
6SE6400-5AW00-0BP0
1. Fit the inverter to the rail using the upper rail
Release Mechanism
latch.
Upper
rail latch
Lower
rail latch
1. To disengaged the release mechanism of the
inverter, insert a screwdriver into the release
mechanism.
2. Apply a downward pressure and the lower rail latch
will disengage.
3. Pull the inverter from the rail.
2 Installation
2. Push the
inverter against
the rail and the
lower rail latch
should click
into place.
29