Table of Contents
Advertisement
PARAMETER
Relay Turn OFF Time
Power Dissipation
Per Channel
(2)
Isolation
NON-Isolated external power
PARAMETER
+5 V
PC Bus Sourced
DC
Digital Ground Return
POWER REQUIREMENTS: +5V: 500 mA Maximum
EMC: Conforms to European Union Directive 89/336/EEC, EN61326-1
SAFETY: Conforms to European Union Directive 73/23/EEC, EN61010-1
ENVIRONMENTAL:
Operating Temperature: 0 to 50°C
Storage Temperature: -20 to 70°C
Humidity (non condensing): 0 to 80% at 35°C
DIMENSION: 18.1cm x 10.8cm x 1.9cm (7.1in x 4.25in x 0.75in)
WEIGHT: KPCI-PIO32IOA – 0.13kg (0.30lbs)
ACCESSORIES:
Cables: CAB-1284CC-0.5, CAB-1284CC-2
STP-36: 36-pin Screw Terminal Panel
Notes:
1.
Inputs are not guaranteed to be compatible with all TTL/CMOS logic families.
2.
Minimum guaranteed isolation, which includes channel to channel, channel to PC and channel to chassis ground.
3.
Selectable, jumper switched LPF. Recommended for AC or slow DC inputs.
4.
De-rate 3.6 mA/°C if ambient temperature is over 25°C.
5.
Output channel in off-state, T
6.
For convenience only. These are not isolated from the rest of the system. Do not use directly in external circuit if isolation is required.
7.
Typical measurement was achieved with an STP-36 and 2 meter cable, CAB-1284CC-2 at 25°C.
MIN.
TYP.
80
60
(6)
Maxiumum Capacity
1.0 Amperes
1.0 Amperes
GENERAL SPECIFICATIONS
= 50°C, 60 V
applied with 30% RH (non-condensing) for maximum and typical values.
A
DC
MAX.
200
430
Location
+5V
1 Top & Bot Connector
GND
19 Top & Bot Connector
KPCI-PDISO8A – 0.12kg (0.26lbs)
UNIT
µs
mW
V pk
Pin #
HW 2/27/02
Rev B
Page
2
Advertisement
Table of Contents
