Table of Contents
Advertisement
1.9.
Duty Cycle – This motor is not continuously rated. The motor is fitted with a
self-resetting thermal trip protection, designed to operate if motor temperatures
become too high due to abnormally high supply voltages. The duty cycle is 15
minutes on/45 minutes off. Under normal operating conditions the thermal trip
is unlikely to be activated.
1.10. Noise – The Mira Extreme is supplied with anti-vibration rubber feet and rubber
wall plugs that isolate the unit from the wall in order to minimize the amount
of noise transmitted. The type of wall the Mira Extreme is fixed to will also
affect the perceived noise level; solid walls will provide a quieter operation.
2. Plumbing
2.1.
Inlet – 15 mm Push-fit inlet manifold.
2.2.
Outlet –
3. Electrical
3.1.
Appliance power supply – 230–240 V, 50 Hz, fused at 3 Amps, via a double
pole switched fused connection unit (not supplied) with a minimum 3mm
contact separation in each pole.
3.2.
Power supply connection – The Mira Extreme is fitted with a terminal block
which will accept cable up to 2.5 mm². Minimum cable size (cross-sectional
area) required under normal installation conditions is 1 mm
3.3.
Absorbed power – Approximately 150 Watts under normal working conditions.
4. Standards and Approvals
4.1.
The Mira Extreme complies with all relevant directives for CE marking.
" BSP to BS2779.
1
/
2
2
.
9
Advertisement
Table of Contents
