Setting The Time Format; Setting The Date Format - Sangean U4 DBT+ Manual

Setting the time format

The display used in standby mode and when the radio is in use can be set to 12 or 24 hour format.
The selected format is then also used when setting the alarms.
1.
Press the Power button to switch on your radio.
2.
Press and release the Menu button until the Advanced menu of the current mode shows on the
display.
3.
Rotate the Tuning control until 'System' appears on the display. Press and release the Tuning
control.
4.
Rotate the Tuning control until 'Time' appears on the display. Press and release the Tuning control.
5.
Rotate the Tuning control until 'Set 12 / 24 Hour' appears on the display. Press and release the
Tuning control.
6.
Rotate the Tuning control to select either 12 or 24 hour format. The current hour format will be
marked with an asterisk. Press and release the Tuning control. If the 12 hour clock format is
chosen, the radio will then use the 12 hour clock for setting of alarms, and will display a 12 hour
clock with an AM or PM indicator.

Setting the date format

1.
Press the Power button to switch on your radio.
2.
Press and release the Menu button until the Advanced menu of the current mode shows on the
display.
3.
Rotate the Tuning control until 'System' appears on the display. Press and release the Tuning
control.
4.
Rotate the Tuning control until 'Time' appears on the display. Press and release the Tuning control.
5.
Rotate the Tuning control until 'Set Date Format' shows on the display. Press and release the
Tuning control.
6.
Rotate the Tuning control to select your desired date format. The current format will be marked
with an asterisk. Press and release the Tuning control.
032