Table of Contents
Advertisement
Listening to music via Bluetooth streaming
Playing previously-paired devices
Alternatively, you can select your required Bluetooth device in the memory, as following:
Press and release the Bluetooth pair button to enter the Bluetooth device memory. Then rotate the
Tuning control to find the desired memorized Bluetooth device and press the Tuning control to connect
to the required Bluetooth device.
Disconnecting your Bluetooth device
Press the Source button to select any bands other than Bluetooth band. Alternatively, press and hold
the Bluetooth pair button to disconnect the link.
If you disconnect the Bluetooth device when you are in Bluetooth mode, the LED light for Bluetooth
icon will then start to flash indicating Bluetooth is discoverable again for pairing.
Pairing and playing your device via NFC
U4 DBT+ is equipped with wireless NFC (Near Field
Communication) feature, allowing playing NFC-
enabled devices to pair and play the music. For non-
NFC devices, please refer to the above sections for
standard Bluetooth pairing.
1.
Turn on your NFC feature on your device.
IMPORTANT
Please make sure the screen of your playing device is on and unlocked to allow NFC to work.
2.
Touch the NFC area of your playing device against the NFC area marked on top panel of U4 DBT+.
The unit will turn on and enter automatic pairing mode. If you pair with U4 DBT+ for the first time,
your NFC-enabled device will be asked the permission to link with the radio. Once paired with a
device, the Bluetooth icon will remain illuminated.
3.
Use the controls on your device or on your radio to play / pause and navigate tracks.
025
Advertisement
Table of Contents
