Table of Contents
Advertisement
Manual tuning – FM
1.
Straighten the antenna.
2.
Press the Power button to switch on your radio.
3.
Press and release the Source button until the FM band is selected.
4.
Rotate the Tuning control to tune to a station. The frequency will change in steps of 50kHz. If
the radio is tuned to a station of sufficient signal strength with RDS information present, then the
display may change to show the station name.
5.
When the waveband end is reached the radio will recommence tuning from the opposite waveband
end.
6.
Set the Volume to the desired setting.
Display options – FM
Your radio has a range of display options for FM mode:-
The Radio Data System (RDS) is a system in which inaudible digital information is transmitted in
addition to the normal FM radio programme. RDS offers several useful features. The following are
available on your radio.
1.
Press and release the Info button to cycle through the various options.
Scrolling text
Programme type
Frequency
Time
Date
NOTE
If no RDS information is available, the radio will be unable to display the station name, scrolling
text and programme type information.
Displays scrolling text messages such as artist / track name, phone in
number, etc.
Displays type of station being listened to e.g. Pop, Classic, News, etc.
Displays the frequency of the station being listened to.
Displays the current Time.
Displays the current date.
020
Advertisement
Table of Contents
