Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sangean PR-D3L
Summary of Contents for Sangean PR-D3L
- Page 1 PR-D3L Version 1...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 1. Read and understand all safety and operating instructions before the radio is operated. 2. Retain instructions: The safety and operating instructions should be retained for future reference. 3. Heed warnings. All warnings on the appliance and operating instructions should be followed. - Page 3 9. Power sources: The radio should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to you home, consult your radio dealer or power company. 10.
- Page 4 14. Do not attempt to service the receiver yourself. Removing the cover may expose you to dangerous voltage, and will void the warranty. Refer all servicing to authorized service personnel. 15. Object and Liquid Entry - Never push objects of any kind into this radio through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
-
Page 5: Display Information
DISPLAY INFORMATION Battery level indicator Real time symbol Sleep indicator Snooze symbol Memory/Sleep timer time Frequency unit Key lock indicator Tuning indicator Frequency and clock Alarm status indicator Wave band AM/PM indicator... -
Page 7: Control Locations
CONTROL LOCATIONS Telescopic Aerial Power on/off Preset buttons 1-5 Alarm On LED indicator Alarm Set Alarm mode set Display Wave band selection and time set button Light button Display button (clock/alarm time/radio frequency) Sleep button Treble/Bass Tone control Tuning up/down Rotary tuning Lock switch Volume control... -
Page 8: Choosing A Power Supply
CHOOSING A POWER SUPPLY This radio can be operated using: 4 Alkaline UM-1 (D size) batteries AC power (230V/50Hz) INSTALLING BATTERIES (1) Position the radio face down. (2) Press the catch and pull out the cover of battery compartment. (3) Insert 4 UM-1 (D size) batteries. (4) Replace the battery cover. -
Page 9: Alarm Time Setting
REAL TIME SETTING (1) The real time can be set while radio is off. (2) Press Time Set button , the HOUR digits will flash, press Tuning Up/Down to adjust the required hour time. (3) Press Time Set button again, the MINUTE digits will flash, press Tuning Up/Down button again to adjust the required minute time. -
Page 10: Radio Alarm
Snooze function for an interval of 5 minutes before pressing POWER button to turn it off. Display will flash Snooze symbol and alarm status. RADIO OPERATION WAVEBAND SELECTION There are three wavebands in PR-D3L unit Waveband Frequency Aerial Type 87.50 - 108 MHz... -
Page 11: Manual Tuning
MANUAL TUNING (1) Press Power button to turn on the radio. (2) Select waveband by pressing Wave Band selector. (3) A single press on the either Tuning Up or Down button will change the frequency up or down for MW, LW and FM bands. Note: Each press of the Tuning Up or Down button will change the frequency in increment of... -
Page 12: Memory Tuning
MEMORY TUNING There are 5 memory presets for each waveband. (1) Tune to the desired frequency or channel using one of the previously described tuning methods. (2) Press any desired PRESET button and hold down for 2 seconds. The Display will show the preset number and M will flash and stop with a beep sound indicating the radio station has been stored. -
Page 13: Lock Switch
LIGHT If the radio is operated by AC power, as long as the radio is turned on, the display illumination will be always on unless you press the LIGHT button to turn it off. However if you use batteries as radio power, whenever you need display illumination, press LIGHT button. -
Page 14: Reset Button
RESET BUTTON If the radio fails to operate correctly or some digits on the display are missing or incomplete, you may use a suitable implement (the end of a paper clip or pen), press the RESET button located at the bottom of the unit. This will reset the microprocessor, clock time and clear all the stations stored in the preset memory. - Page 15 ANTENNA: FM: Telescopic aerial MW and LW bands: Built-in ferrite bar antenna. DIMENSION: W x H x D: 280 x 160 x 92 in mm. Weight : Approx. 3200g without batteries. Note: Specifications will change without prior notice.