Battery Charging Status Indicator - Sangean U4 DBT+ Manual

Battery charging status indicator

Please note that the battery charging status detection can only be activated when the radio is in
charging mode (i.e. the radio is switched off, the battery switch slides to the NiHM position and it is
connected to the AC mains socket).
When charging is in progress, display is shown at
right and the charging indicator flashes yellow.
When the charging process is completed, the
charging indicator lights in steady yellow.
If batteries are already fully charged, display is
shown at right and it will switch to standby mode after
5 seconds.
When there is no battery / missing batteries in the
compartment or some of batteries are inserted with
the incorrect polarity, display is shown at right and it
will enter standby screen after 5 seconds.
NOTE
If a battery is removed while charging, display is
shown at right and the charging indicator lights
red.
During the charging process, if a battery is detected
as faulty / damaged, a solid square will be displayed
under the corresponding battery number (see picture,
right) and the charging indicator flashes red.
012