Alarm Time Setting - Sangean PR-D3L Instruction Book

REAL TIME SETTING
(1) The real time can be set while radio is off.
(2) Press Time Set button , the HOUR digits will flash, press
Tuning Up/Down to adjust the required hour time.
(3) Press Time Set button again, the MINUTE digits will flash,
press Tuning Up/Down button again to adjust the required
minute time.
(4) Press Time Set button again to complete time setting.

ALARM TIME SETTING

(1) Alarm time can be set while radio is on or off.
(2) Press and hold Alarm Set button for more than 2 seconds
until Hour digit and alarm symbol flash.
(3) Press Alarm Mode button to change the alarm mode to alarm
by radio (Display shows
(Display shows
(4) Press Time Set button and same procedures to set real time
to set alarm time.
(5) To cancel the Alarm set, press and hold Alarm Set button for
more than 2 seconds until alarm symbol disappears.
ALARM ON
When alarm is on, Alarm on LED will flash . Press POWER
button to turn it off for 24 hours. alarm will last for one hour if
not turned off by pushing the POWER button.
) or alarm by buzzer
).
GB
8