Table of Contents
Advertisement
Listening to music via Bluetooth streaming
Pairing and playing your device via NFC
NOTE
1.
If you would like to link a different Bluetooth device for the first time via NFC, disconnect the
currently- linked Bluetooth device first.
2.
The location of the NFC detection area is not the same on all devices. When connecting with
other Bluetooth device via NFC, refer to the User guide of your Bluetooth device for more
information.
3.
Some of metallic case or cover for mobile phones may reduce the sensitivity of NFC. Make
sure you remove it, before activating the NFC.
Disconnecting your NFC-enabled device
To disconnect your device, simply touch it again on the top of the unit. The LED light for Bluetooth icon
will then start to flash indicating your radio is discoverable again for pairing.
IMPORTANT
Please make sure the screen of your playing device is on and unlocked to allow NFC to work.
Alarms
Your radio has 2 separate alarms which can be set to wake you to DAB, FM radio or buzzer alarm.
Each alarm can be set to sound once, daily, on weekdays or at weekends. The alarms can be set
whether the radio is on or in standby mode. In the event of a power interruption your radio has a built
in memory chip that will maintain your alarm settings for when the power is restored.
Ensure that the time is set correctly before setting the alarms.
NOTE
If no buttons are pressed for a while, the radio will exit the alarm setup.
026
Advertisement
Table of Contents
