Table of Contents
Advertisement
Set up my EQ profile
If you find the preset equalizer functions not to your liking, you may set up a custom treble and bass as
following:
1.
Press the Volume control to enter EQ menu.
2.
Rotate the Tuning control until 'My EQ...' is shown on the display. Press the Tuning control to enter
the adjustment mode.
3.
Rotate the Tuning control until 'Treble' is shown on the display. Press the Tuning control to enter
the treble adjustment mode.
4.
Rotate the Tuning control to adjust the treble level (between-5 and+5). The sound will change as
you adjust the level. Press the Tuning control to confirm the setting. The display will then revert to
My EQ menu.
5.
Rotate the Tuning control until 'Bass' is shown on the display. Press the Tuning control to enter
the adjustment setting. Rotate the Tuning control until the desired level (between -5 and +5) is
displayed. The sound will change as you adjust the level. Press the Tuning control to confirm the
setting.
6.
Rotate the Tuning control until 'Loudness' is shown on the display. Press the Tuning control to
enter the adjustment setting. Rotate the Tuning control to select the desired setting. The options
are On or Off. Then press the Tuning control to confirm the setting.
NOTE
To quickly cancel the effect of My EQ profile, rotate the Tuning control until 'Normal' is shown on
the display and press the Tuning control. The treble and bass settings will be memorized for the
next time that you wish to use the My EQ.
034
Advertisement
Table of Contents
