Setting The Time Format / Date Format; Clock And Alarms - Sangean PR-D14USB User Manual

Clock and Alarms

Setting the time format
The clock display used in stand-by mode and on the playing mode
screens can be set to  or 4 hour format. The selected format is
then also used when setting the alarms.
. Press and hold the Info / menu button to enter the menu setting.
. Press the Tuning Up / Down until CLOCK xxH appears on the
display, then press and release the Scan button to enter the
setting and the setting of time format begins to flash.
3. Press the Tuning Up / Down to select either  or 4 hour format.
Press and release the Scan button to confirm your choice of
clock format.
Note: If the 12 hour clock format is chosen, the radio will then use
the  hour clock for the setting of alarms with a PM indicator.
Setting the date format
. Press and hold the Info / menu button to access the menu setting.
. Press the Tuning Up / Down until today's date shown on the
display. Press and release the Scan button to enter the date
format setting.
3. Press the Tuning Up / Down to select the required date format.
Press and release the Scan button to confirm your choice of date
format.
GB