Manual Tuning Fm - Sangean DPR-17 Manual

Manual tuning – FM
1. Press the Power button to switch on your radio.
2. Press the Band button to select the FM band. Fully extend the
antenna for best reception.
3. Rotate the Tuning control to tune to a station. The frequency will
change in steps of 50kHz on FM.
4. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
5. Set the Volume using the Volume Up/Down buttons to the
desired settings.
6. To switch off your radio press the Power button.
19
2
3
5