Mounting (Non-Rotation) Brackets; Thermostat; Transformers - KMC Controls MEP-4 Series Application Manual

Direct-coupled actuators (40 to 90 in-lb.)
Table of Contents

Advertisement

Mounting (Non-Rotation) Brackets

An
HMO-4002
non-rotation bracket is provided
with MEP-40xx/48xx/425x/455x actuators (but is not
for use with MEP-427x/457x/49xx models). See also
the HMO-4001.
The
HMO-4001
non-rotation "T" bracket can be used instead of the HMO-4002 to span an open distance, or
it can be formed (bent) into a shape that increases the distance between the mounting surface and the actua-
tor. It is provided with MEP-427x/457x/49xx actuators.

Thermostat

For sample proportional single-zone heating/cooling
and pressure-dependent VAV applications using the
CTE-5202
electronic thermostat, see the
Applications
Guide.
MEP-4xxx Direct-Coupled Actuators (40 to 90 in-lb.)
Non-Rotation Bracket (HMO–4002) Provided
Non-Rotation "T" Bracket (HMO–4001) Order Separately
CTE-5202
The
HMO-4004
non-rotation bracket kit is used for
mounting to ball valves.
9" [229]
9" (229 mm)

Transformers

An
XEE-6000 series
VAC power to the actuator:
XEE-6111-050
XEE-6112-050
7
3/4" [19]
3/4" (19 mm)
Class-2 transformer provides 24
120 to 24 VAC, 50 VA, single-hub
120 to 24 VAC 50 VA, dual-hub
Applications Guide, AN0513A Rev. J

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MEP-4 Series and is the answer not in the manual?

Table of Contents