Table of Contents
Advertisement
Status informa-
tion
Rev. 01 - 2014 - E
891076E_492055_492056_TDX_QAM_module - User Guide - EN.indd 23
Status information about the output is placed at the bottom of the Configura-
tion window.
Watch the status information to check that the output module.
Status
SW revision
Current payload
Max payload
When you have finished the configuration of the output, click the Submit but-
ton to enter the information into the headend system and return to the Out-
put window.
Remember to click the Apply button in the upper right-hand corner to save
new settings in the configuration.
TDX Service Tool
Informs you whether output is enabled or disabled.
Displays the software version of the output module.
Note
The software version of the QAM module
must be identical with the software versions
installed on the other input/output modules as
well as the headend units.
Informs you about the level of data that is currently be-
ing transmitted.
Displays the maximum limit on how much data you can
transmit.
23
17-01-2014 11:25:52
Advertisement
Table of Contents
