Delete Output Modules - Triax 492055 User Manual

TDX Service Tool
Delete output
modules
Rev. 01 - 2014 - E
891076E_492055_492056_TDX_QAM_module - User Guide - EN.indd 24
When you return to the Output window the configuration of the output mod-
ule is displayed in the module list.
Now you can configure the other outputs of the first QAM module and then
continue to configure the other output modules, following the procedure just
described.
To remove an output module and the associated configuration you can use
the Delete button of the module in question in the Output window.
Click the Delete button of the QAM output module you want to remove.
A message window is displayed asking you to confirm that you want to re-
move the output module.
Until you have physically removed the output module from the headend unit
the module list will display four lines with the writing in red.
24
17-01-2014 11:25:52