4-3 Accessory
1. IE-1
1 Earphone
2 Silicon Sleeve
3 Cord
4 1/8" Stereo Phone Plug
5 Case
3
2
1
2. Power Suppty
2. DR-900(Optional)
7
5
4
4
5.
Preparing Procedures
5-1 SIEM-2T
1. Set the rubber pad
Four self-adhesive rubber pads are provided to ensure the
stability. They are to be placed on the bottom of the
transmitter.
2. Connect the audio source, such as a mixer.
Connect the mixer output to the XLR / 6.3mm combo
input in the Front panel of SIEM-2T with the AF input
cable.
NOTE: Two balanced XLR /
provided. You may use either one or both for a stereo source.
Also, two balanced
6.3mm loop out connectors are provided
for multiple systems application.
(Figure A / P9)
6.3mm combo inputs are
8