Preparing Procedures & Basic Operation; Receiver - JTS US-902D Pro Instruction Manual

5
Preparing procedures & basic operation

5-1Receiver

(2) Audio Output Connector
Connect one end of the AF output cable to the AF output socket in the rear panel,
then plug another end to the "MIC IN" input socket of a mixer or ampli er. (Step 1
of Figure 1)
It is equipped with balanced XLR output and unbalanced
the proper way for use
(1) Power output connector
Plug in one end of AC/DC adaptor cable to DC input socket in the rear panel of
receiver, and plug another end into an AC outlet. (Step 2 of Figure 1)
(3) Turn the receiver on by pressing the
Power bu on on the front panel
(Figure 2)
(4) Adjust the volume control to a proper
level. (Figure 3)
ANT. 2
(Figure 1)
∅
6.3mm output, choose
(Figure 2)
(Figure 3)
ANT. 1
12