Jung 1254 TSE Operating Instructions

Light Management
Stand: Feb-10 325 335 13
Operating Instructions
Tronic switching insert
1.

Function

The Tronic switching insert is a device provided with an electronic switch
and serving for switching light installations or electrical consumers:
•
230 V incandescent lamps.
•
230 V halogen lamps.
•
LV halogen lamps in conjunction with Tronic transformers.
Events are caused by switching commands from the covers such a
automatic switch or presence detector attachment. Switching commands
given through an extension or a radio transmitter lead to well-directed
turning on or off. The lamps are turned on by a gentle soft start. This
Operating Instructions leaflet describes the functionality in combination
with the presence detector attachment. For the exact functionalities in
conjunction with the use of other attachments or of the remote control
unit, please refer to the corresponding Operating Instructions leaflets.
2.

Safety instructions

Attention: Electrical equipment must be installed and fitted by qualified
electricians only. Not suitable for safety disconnection. Shutting off does
not disconnect the load electrically from the mains. Non-observance of
the installation instructions may cause fire or other hazards.
Do not connect any electronic lamps, e.g. switchable or dimmable
compact fluorescent lamps or LED lamps.
Device can be damaged.
Important
Not suitable for disconnecting. Not suitable for operation in conjunction
with conventional transformers. Do not change the attachment while
mains voltage is applied, as this will entail malfunctioning.
Tronic switching insert
Ref.-no.:1254TSE