Maximum Area When Using Crop Marks
When crop marks are used, the printing area is reduced from the maximum area by an amount equal to the
crop marks.
12.5 mm
(0.5 in.)
10 mm
(0.4 in.)
Printing area
10 mm
(0.4 in.)
12.5 mm
(0.5 in.)
The Media-cutoff Location during Continuous Printing
When a media-cutoff command is sent from the computer, the cutoff location on the media is as shown in
the figure below.
Cutoff location
Maximum area
Crop mark
Second page
First page
Printing Area
12.5 mm
(0.5 in.)
10 mm
(0.4 in.)
10 mm
(0.4 in.)
12.5 mm
(0.5 in.)
75 mm (3.0 in.)
Margin
(software RIP setting value)
7
139