Printing Area
Maximum Printing Area and Margins
Trailing edge of the media
Media clamp
Left
margin (*1)
Leading edge of media
A: Setting of the [SIDE MARGIN] menu item (5 mm, 10 mm [default setting], or 25 mm)
B: Width clamped by the media clamp (approx. 5 mm (0.2 in.))
*1 The width of the left and right margins is the total of A and B. In the following cases, however, the setting
for A itself becomes the width of the margin.
• When media has been loaded without installing the media clamps
• When the [SHEET TYPE] menu item is set to [CLEAR] (regardless of whether the media clamps are present)
*2 You can change the width of the right margin by setting the base point (printing-start location).
P. 38, "Setting the Output-start Location"
7
138
Max. 1,615 mm (63.6 in.)
A
B
95 mm
(3.7 in.)
Printing area
Origin of printing
Max. 24,998 mm
coordinates
(984.2 in.)
110 mm
(4.3 in.)
Media
Media clamp
A
Right margin
B
(*1)(*2)