When Problems such as Dot Drop-out Are Not Fixed
When Problems such as Dot Drop-out Are Not Fixed
Perform the procedure below if ink discharge issues such as dot drop-out are not corrected after performing
cleaning using the cleaning function (normal, medium, powerful) or manual cleaning.
A large amount of ink will be discharged during this operation. Perform this operation only when dot
drop-out cannot be corrected even after performing cleaning using the cleaning function (normal,
medium, powerful) or manual cleaning.
P. 52, "Maintenance That Should Be Performed Daily"
60, "Maintenance That Should Be Performed Once a Month or More"
Procedure
Discard the discharged fluid in the drain bottle.
Refer to P. 52, "Disposing of Discharged Fluid" to discard the discharged fluid. Start from step
CAUTION
Press
.
MENU
SUB MENU
SUB MENU
INK CONTROL
INK CONTROL
INK RENEWAL
CHECK
DRAIN BOTTLE
RENEWING INK...
>>>>>> 01:45
INK CONTROL
INK RENEWAL
Press
, then
The discharged fluid must be discarded at this stage.
A large amount of ink will be discharged during this operation. The discharged
fluid must be discarded at this stage. If you do not discard it at this stage,
discharged fluid may overflow from the drain bottle during the procedure that
follows.
Press
on the left.
Press
Press
on the left.
Press
Press
on the left.
Press
Check that the drain bottle is empty, and then press
.
The screen shown in the figure appears.
The remaining process time (estimated) is displayed on the screen.
("01:45" = "1 minute and 45 seconds")
When finished, the screen shown in the figure appears again.
to go back to the original screen.
,
P. 56, "When Normal Cleaning Is Not Effective"
several times to display the screen shown
.
several times to display the screen shown
.
several times to display the screen shown
.
,
P.
3
.
69