Roland Soljet EJ-640 User Manual page 77

2.
Replace the felt wipers.

Open the right cover.
FINISHED?


Open the front cover.

Replace the first felt wiper.
Removing an old felt wiper
Hook
Disconnect the hooks.
Using the tweezers to press on the hook in the hole on
the felt wiper makes it easier to remove the felt wiper.
Attaching a new felt wiper
Preparations are complete when this screen appears.
Tweezers (included)
Replacing Consumable Parts
Touch the location shown in the figure to
discharge any static electricity.
Pull up and out. If the area is dark and difficult
to see, use a flashlight or a
similar device to illuminate
the area.
Hook
Attach the part to the hooks.
Be sure to attach the part to the
hooks. Failure to do so may result
in dot drop-out or other problems.
3
75