Output Operation Management; Printing A System Report; Determining What Happens When Ink Runs Out - Roland Soljet EJ-640 User Manual

Output Operation Management

Printing a System Report

This prints system information, including a list of setting values.
Procedure

Press

MENU
SUB MENU

SUB MENU
SYSTEM REPORT

Press

Determining What Happens When Ink Runs Out

This lets you change, according to your purpose, the operation that takes place when a subtank cartridge is
empty.
Procedure

Press

MENU
5
SUB MENU

SUB MENU
INK CONTROL

EMPTY MODE
STOP
STOP
CONT.
(continue)

Press
Description
When "STOP" is selected, printing pauses, so colors may be uneven. Ensure that the remaining ink is sufficient
before you begin printing. When "CONT" is selected, printing does not stop even if ink runs out completely.
To replace an ink cartridge, wait until printing ends or press
108
.
Press
on the left.
Press
Press
on the left.
Press
Printing starts.
, then to go back to the original screen.
.
Press
on the left.
Press
Press
on the left.
Press
Press
CONT.
Press
Printing pauses immediately when a cartridge becomes empty.
Printing does not stop automatically when a cartridge becomes empty. When a
cartridge becomes empty, a warning beep sounds.
, then to go back to the original screen.
several times to display the screen shown
.
several times to display the screen shown
.
several times to display the screen shown
.
several times to display the screen shown
twice.
or to select a setting.
to confirm your entry.
to pause printing.