Record FC-specifc information for Linux
Select the FC worksheet to record your protocol-specific storage configuration information. You need this
information to perform provisioning tasks.
FC worksheet for Linux
You can use this worksheet to record FC storage configuration information. You need this information to
perform provisioning tasks.
The illustration shows a host connected to a DE Series storage array in two zones. One zone is indicated by
the blue line; the other zone is indicated by the red line. Any single port has two paths to the storage (one to
each controller).
Host identifiers
Callout
Host (initiator) port connections
No.
1
Host
2
Host port 0 to FC switch zone 0
7
Host port 1 to FC switch zone 1
Target identifiers
Callout
Array controller (target) port connections
No.
3
Switch
6
Array controller (target)
5
Controller A, port 1 to FC switch 1
9
Controller A, port 2 to FC switch 2
4
Controller B, port 1 to FC switch 1
8
Controller B, port 2 to FC switch 2
72
ThinkSystem DE Series Hardware Installation and Maintenance Guide for 2U Enclosures
WWPN
not applicable
WWPN
not applicable
not applicable