Mel_Ev_Sas_Phy_Disabled_Bypassed_Port - 0X5103; Mel_Ev_Sas_Phy_Disabled_Bypassed_Drive - 0X5104 - Lenovo ThinkSystem DE Series Hardware Installation And Maintenance Manual

Event Specific Data - Optional data is provided with this event.
MEL_DATA_CONTROLLER_ID
RecoveryFailureType - REC_IOC_DIAG_FAIL ( ctrlIocDiagFailed.html )

MEL_EV_SAS_PHY_DISABLED_BYPASSED_PORT - 0x5103

This event occurs when: One of the PHYs on a wide port is disabled. The wide ports are used only between
the IOC and either the local or the partner controller's expander. The bad hardware would be one of the
controllers or the mid-plane.
Event Name - SAS PHY Disabled Bypassed Port
Event description: SAS PHY disabled bypassed port
Event Group - Base Controller Diagnostic
Event Priority - CRITICAL_EVENT
Log Group - Drive (0x2)
Event Category - Failure (0x2)
Event Component Type - Channel (0x0, 0x6)
Event Specific Data - Optional data is provided with this event.
MEL_DATA_SASFI_PHY_ERROR_BCAST
RecoveryFailureType - N/A

MEL_EV_SAS_PHY_DISABLED_BYPASSED_DRIVE - 0x5104

This event occurs when: A PHY that is connected to a drive is disabled. The error could be in the expander or
drive. This event is generated only when the controller disables a PHY not the ESM. The easiest replacement
option is the drive, so it should be called out as the first choice for replacement.
Event Name - SAS PHY Disabled Bypassed Drive
Event description: SAS PHY disabled bypassed drive
Event Group - Base Controller Diagnostic
Event Priority - CRITICAL_EVENT
Log Group - Drive (0x2)
Event Category - Failure (0x2)
Event Component Type - Channel (0x0, 0x6)
Event Specific Data - Optional data is provided with this event.
MEL_DATA_SASFI_PHY_ERROR_BCAST
RecoveryFailureType - N/A
250
ThinkSystem DE Series Hardware Installation and Maintenance Guide for 2U Enclosures