D-Link AC1200 User Manual page 73

Section 4 - Configuration
Start IP: If DHCP server has been selected, specify the starting IP address in
the DHCP server pool.
End IP: If DHCP server has been selected, specify the end IP address in the
DHCP server pool.
If DHCP server has been selected, specify the lease time in minutes
Lease Time:
for DHCP-issued IP addresses.
Enable DNS Disable to transfer the DNS server information from your ISP to your
Relay:
computers. If enabled, your computers will use the router for a DNS
server.
If DHCP relay has been selected, specify the external DHCP server
External DHCP
server IP: from which IP addresses should be assigned. Click on the Add button
to add more server IPs.
Static IP Addresses
Clients list:
Click this button to select a current host to add to the table of reserved
static IP address. See Clients List below.
Add:
Click this button to manually reserve a local IP address.
Delete:
Click this button to delete a selected reserved IP address.
IP address:
Indicates the reserved static IP.
MAC address:
Indicates the MAC address for which the IP is reserved.
Hostname:
Indicates the hostname of the client for which the IP is reserved.
Click Apply when you are done.
D-Link DIR-1210 User Manual
IPv4 (cont)
69