D-Link AC1200 User Manual page 65

Section 4 - Configuration
Name: Specify a name for the VLAN.
Enable: If prompted, toggle this switch.
Type:
If prompted, select a VLAN type from the list.
VLAN ID: If prompted, specify the VLAN ID.
Untagged Ports
Untagged Ports:
If you have chosen to edit an existing untagged connection, or if you
have chosen to add a bridge connection, select the untagged ports
to be included in the VLAN.
Note: Ports can only belong to one VLAN at a time, and may need to be
freed from other VLANs before changing this setting.
Tagged Ports
VLAN ID: If you have chosen to edit an existing tagged connection, or if you
have chosen to add a bridge connection, select the tagged ports to
be included in the VLAN.
Click Apply when you are done.
D-Link DIR-1210 User Manual
VLAN Add/Edit
61