D-Link AC1200 User Manual page 31

Section 4 - Configuration
Select Static IP if your IP information is provided by your Internet Service
Provider (ISP). Choose Basic configuration or All Settings.
Basic
MAC address:
The default MAC address is set to the Internet port's physical interface
MAC address on the router. You can edit that address manually here.
Clone MAC
Toggle this switch to clone the MAC address of the device you are
address of your
using to access the web UI. Note that no two MAC address within the
NIC:
same subnet can be the same.
Restore Default
Click here to restore your router's default MAC address.
MAC Address:
IP address: Specify the IP address provided by your ISP.
Netmask: Specify the subnet mask provided by your ISP.
Gateway IP Specify the default gateway address provided by your ISP.
address:
Primary DNS Specify the primary DNS server IP address assigned by your ISP.
server:
Secondary DNS
Specify the secondary DNS server IP address assigned by your ISP.
server:
Click Apply when you are done.
D-Link DIR-1210 User Manual
Static IPv4
27