D-Link AC1200 User Manual page 40

Section 4 - Configuration
All Settings
Connection Type: Select your connection type from drop-down menu:
For Dynamic IPv4 refer to page 24.
For Static IPv4 refer to page 27
For Dynamic IPv6 refer to page 31
For Static IPv6 refer to page 35
For PPPoE refer to page 38
For PPPoE IPv6 refer to page 42
For PPPoE Dual Stack refer to page 47
For PPTP refer to page 52
For L2TP refer to page 56
Note: this option can only be edited in the WAN/Creating mode.
Enable Toggle this switch to enable the connection. This is enabled by default.
Connection:
Disabling this feature may disable your Internet connection.
IPv6
IPv6 address:
Specify the IPv6 address provided by your ISP.
Prefix:
Specify the prefix provided by your ISP.
Gateway IPv6
Specify the default gateway address provided by your ISP.
address:
Primary IPv6 DNS Specify the primary DNS server IP address assigned by your ISP.
server:
Secondary IPv6
Specify the secondary DNS server IP address assigned by your ISP.
DNS server:
D-Link DIR-1210 User Manual
Static IPv6 (cont)
36